اشترك في قائمة البريدية

Concerning Wheels And Casters For Industrial Material Handling

By Dennis Martin


In selecting wheels and also casters, you have to be conversant with the kind of job they will be performing in order to make the correct choice. There are a number of individual factors which need to be varied when choosing wheels and casters for industrial material handling.

If the weight of the load to be handled is high, you need a big wheel. The weight influences the speed of the wheels. However, you can reduce the resistance by fitting bearing. This is mandatory if you are handling materials weighing over four hundred pounds.

The condition of the floor is also vital. Some have cracks and the wheel should be able to pass over them without any problems. However, this can only be ensured if it is wide enough. If the floor surface is tiled, carpeted or made of linoleum, it is better to use polyurethane or rubber wheels.

Unusual condition may prevail sometimes. To note is that each wheel is made to offer certain advantages in various conditions. Knowing the unique specs of each product will help you in coming to a sound decision when faced with challenges. Rubber is corroded easily by chemicals and oils. Additionally, it becomes slippery when there is oil on the floor. In such a scenario, you should get polyurethane, Maxim, polyolefin, steel or phenolic trundles.

You will be able to do a lot of work if the machines rotate faster. The speed is influenced by the size of the wheels. Remember that rotation is aided by the bearings fitted inside it. If you are only interested in speed, you will find the balls bearing convenient. However, you will not be able to move heavy loads using them. In such a case, the best alternative is roller bearings. However, you can improve the speed by selecting very large ball bearings.

The temperature of the rooms in the industry is an important factor too. The products are not affected by the room temperatures. However, if the degree of hotness or coldness goes too high, problems will occur. However, use of green lube can restore the functionality of the items even in these temperatures. Nonetheless, before taking such a step you may have to consult the manufacturer.

Local distributors can give you a lot of information concerning the products. Additionally, you can also get such information from the manufacturers. However, this does not mean that you should not go the extra mile to search for information on your own. Failure to do so will make you vulnerable to conmen and you will suffer huge losses by the time you realize you purchased the wrong product.

If possible, identify one producer or manufacturer to get the items from. You may earn bonuses or discounts because of being loyal. Also, these people will be willing to give you free advice on what to do in order to prolong the life of the items you have purchased. Handling the wheel or caster the wrong way may lead to breakdowns which cost a fortune to repair. Be well informed on what to consider.




About the Author:



No comments:

Post a Comment